IDE APPLICATION: It is widely used in RGB LED strip light, led module and so on. The package comes with a complete set of remote controller and receiver, both are very convenient and easy to use.
BEAUTY& USEFUL: Similar to the shape of Canton Tower, the remote looks fashionable and elegant, with the frosted shell makes touch best. 16 million color, 0-100% brigtness, dynamic/static mode, the capacitive touch wheel design makes the remote simple and practical to use .
2.4G RF: With the technology of the 2.4G high frequency wireless remote control, high speed telecommunications, strong anti-interference ability, remote distance up to 98ft, one receiver can accept up to 10 remotes control.
PRE-SET 10 MODES: When control RGB led light, matched with RGB remote, built in 10 change modes optional, including jump or gradual change style, creates colorful static or dynamic effect for you. PWM achieve 4096 levels flicker-less dimming.
WiFi CONTROL: The receiver can be WiFi controlled by APP installed on IOS or Android mobile devices while working with WiFi-Relay controller (Not Include), customize your own RGB change mode list by APP for advanced function.
Technical parameters :
RGBW/RGB 2.4G RF Touch Wheel Remote Controller
Working Voltage: 3VDC ( Battery include )
Output Signal: RF ( 2.4G )
Output Current: <20mA
Standby Current: <10uA
Standby Time: 12 months
Remote Distance: 98ft
Size: L107 x W58.5 x H9mm
Working Temperature: -30℃~55℃
Net Weight: 34g
Operating Life: 50000 hours
RGB/CCT/Dimmer LED Receiver
Input voltage: 12-24VDC
Output type: PWM constant voltage
Output current: 3CH, 4A/CH
Output power: 3 x (48-96)W
Grey levels: 4096/CH
Dimming range: 0-100%
Remote distance: 98ft
Working temperature: -30℃~55℃
Product size: L97×W33×H18mm
Net weight: 38g
The product is non-waterproof. Please avoid the sun and rain.
Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
Please check whether the output voltage of any power supplies used comply with the working voltage of the product.
Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
Before the first use, please pull out the plastic battery barrier sheet from the battery compartment located on the bottom of the remote. Pay attention to the battery positive and negative polarity.
1 Piece of RGB/ CCT/ Dimmer LED Receiver
1 Piece of RGBW/ RGB 2.4G RF Touch Wheel Remote ( Battery include )
CE and RoHS approved